Part Number Hot Search : 
1N4758 PXD16 TCA440 6520A MB110 CAT4026 SD120 LTC3035
Product Description
Full Text Search
 

To Download TPD1024S07 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 TPD1024S
TOSHIBA Intelligent Power Device Silicon Monolithic Power MOS Integrated Circuit
TPD1024S
Low-side Power Switch for Motors, Solenoids, and Lamp Drivers
The TPD1024S is a monolithic power IC for low-side switches. The IC has a vertical MOS FET output which can be directly driven from a CMOS or TTL logic circuit (e.g., an MPU). The device is equipped with an intelligent self-protection function.
Features
A monolithic power IC with a new structure combining a control block and a vertical power MOS FET (-MOS) on a single chip Can directly drive a power load from a CMOS logic. Built-in protection against overvoltage, load short-circuiting, and thermal shutdown Low on-resistance : RDS (ON) = 0.5 (max), (@VIN = 5 V, Tj = 25C) 3-pin power-molded package usable for surface mounting.
Pin Assignment
Weight HSIP3-P-2.30B HSOP3-P-2.30A
: 0.36 g (typ.) : 0.28 g (typ.)
Note:
Due to its MOS structure, this product is sensitive to static electricity.
Marking
TPD1024S
Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish.
1
2006-10-31
TPD1024S
Block Diagram
Pin Description
Pin No. Symbol Function Input pin. Input is CMOS-compatible, with pull-down resistor connected. Even if the input is open, output will not accidentally turn on. Output pin. When current in excess of the typical current (3.5 A (typ.)) flows to the output pin, the current limiter operates to protect the IC. Ground pin.
1
IN
2 3
OUT GND
Timing Chart
2
2006-10-31
TPD1024S
Absolute Maximum Ratings (Ta = 25C)
Characteristic Drain-source voltage Output current Input voltage Power dissipation Operating temperature Junction temperature Storage temperature Ta = 25C Tc = 25C Symbol VDS (DC) ID VGS PD Topr Tj Tstg Rating 40 1.5 -0.5 ~ 6 1 10 -40 ~ 85 150 -55 ~ 150 Unit V A V W C C C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Electrical Characteristics (Tj = 25C)
Characteristic Drain-source breakdown voltage Operating supply voltage Current at output off Input threshold voltage Input current On resistance Thermal shutdown temperature Overcurrent protection Switching time Diode forward voltage Between drain and source Avalanche energy Symbol V(BR) DSS VDD (OPR) IDSS (1) IDSS (2) Vth IGSS RDS (ON) TS IS tON tOFF VDSF EA Test Circuit 1 Test Condition VGS = 0, ID = 10 mA VGS = 0, VDS = 40 V VGS = 0, VDS = 24 V VDS = 10 V, ID = 1 mA VGS = 5 V, at normal operation VGS = 5 V, ID = 1 A VDS = 12 V, VGS = 5 V VDS = 12 V, VGS = 5 V, RL = 12 IF = 1.5 A L = 10 mH, Single pulse Min 40 0.8 30 Typ. 160 3.5 50 10 0.9 Max 18 3 100 2.5 300 0.5 1.8 Unit V V mA A V A C A s s V mJ

Test Circuit 1
3
2006-10-31
TPD1024S
8080
IIN (A)
IIN - V IN
Tj = 25
6060
INPUT CURRENT
4040
2020
0
0
0
0
2 INPUT VOLTAGEV (V)6 4 IN
2
4
6
8
8
4
2006-10-31
TPD1024S
No heat sink
5
2006-10-31
TPD1024S
Package Dimensions
Weight: 0.36 g (typ.)
6
2006-10-31
TPD1024S
Package Dimensions
Weight: 0.28 g (typ.)
7
2006-10-31
TPD1024S
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
8
2006-10-31


▲Up To Search▲   

 
Price & Availability of TPD1024S07

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X